<![CDATA[UDS Ultrasound Forums - Other Platforms]]> 2012-01-31T11:25:10Z PunBB http://www.u-d-s.com/forums/ <![CDATA[Acuson Antares doesn't start]]> Hello all!

The system writes:

"Alert. The EM Module has been detected as requiring re-test. When boot up is finished go to the syngo service page's Test Tool menu and select OK when prompted to execute Module Re-Test. The system is continuing to start up"
and doesn't work - black screen.

How can i access Sevice Menu?  Sorry, this is my first Acuson Antares, and i don't know, how can i use FREE trial password by Siemens smile

Thanks!

]]> http://www.u-d-s.com/forums/user/506/ 2012-01-31T11:25:10Z http://www.u-d-s.com/forums/topic/208/acuson-antares-doesnt-start/new/posts/ <![CDATA[forums for atl hdi 3500]]> is there any forum for atl hdi 3500

]]> http://www.u-d-s.com/forums/user/562/ 2011-12-15T01:39:12Z http://www.u-d-s.com/forums/topic/234/forums-for-atl-hdi-3500/new/posts/ <![CDATA[HDI-4000 error code 58]]> System: HDI-4000

An L12-5/38mm is connected to HDI-4000,
and an error code 58 appears.
I checked the service manual, and
it means that code 58 is "HV_DATA_DOWNLOAD_ERROR".

System problem? Probe problem?
(This probe works well on HDI-5000.)

]]> http://www.u-d-s.com/forums/user/265/ 2011-12-15T01:38:25Z http://www.u-d-s.com/forums/topic/235/hdi4000-error-code-58/new/posts/ <![CDATA[technical assistance hdi 1500]]> Good day.

Please help me to install a new printer hp deskjet to ultrasound hdi 1500.

Thank you very much.

Excuse my english because i speak french and there is translation in french lunguage:

Bonjour.

Veuillez je vous prie de bien vouloir m'aider à installer une nouvelle imprimante hp deskjet 8320 en remplacement de l'imprimante d'origine qui est hors d'usage, et cela, sur un appareil ultrasound atl hdi 1500.

D'autre part, je vous serai très reconnaissant de m'indiquer comment procéder à l'installation de tout autre périphérique sur cet appareil.

Je vous remercie vivement pour votre amène et précieuse assistance.

Salutations cordiales.

Thank you for your repply.

Actually, at the rear of the hdi1500, there is a parallel port. And on the left side there is a cdrom drive.
How do therefore to install a printer through the parallel port?

thank you very much and Cordial greetings

]]> http://www.u-d-s.com/forums/user/554/ 2011-11-28T18:46:08Z http://www.u-d-s.com/forums/topic/229/technical-assistance-hdi-1500/new/posts/ <![CDATA[Operation Manual HDI-1500]]> Hi all

Any one got the operation manual for ATL Ultrasound HDI 1500 ?

Thanks

Munir

]]> http://www.u-d-s.com/forums/user/470/ 2011-10-04T03:34:24Z http://www.u-d-s.com/forums/topic/214/operation-manual-hdi1500/new/posts/ <![CDATA[Welcome to Support Forum for other systems]]> Welcome to the Support Forum for other systems.  Post here to receive free technical support for systems which do not currently have a dedicated support forum.

]]> http://www.u-d-s.com/forums/user/2/ 2011-09-06T21:11:46Z http://www.u-d-s.com/forums/topic/29/welcome-to-support-forum-for-other-systems/new/posts/ <![CDATA[ATL HDI 1500]]> i have a problem with a HDI 1500 system , when operating the following appears :

"AT LEAST ONE SERVICE OR DRIVER FAILED DURING SYSTEM STARTUP , USE EVENT VIEWER TO EXAMINE THE EVENT LOG FOR DETAILS"
when pressing OK , it completes and another msg appears :
"DEBUG ASSERTION FAILLED "
"c:/MAINSYS/BIN/HDI1500.EXE "
"FILE : D:/GAIATCLAYER/SRC/MSGPOOL.CPP"
"LINE : 247 "
"SEE VIRTUAL C ++ DOCUMENT AND ASSERT ... "
" ABORT .. RETRY ... IGNORE "

Tried to press ABORT , it goes back to main Windows of the PC , RETRY keep it uploading and never complete , IGNORE guided me to the main screen of the ultrasound , but the probes didnt work ,

Please anyone have any idea about it ? any got service manual ?

thanks a lot

]]> http://www.u-d-s.com/forums/user/470/ 2011-08-21T11:49:15Z http://www.u-d-s.com/forums/topic/194/atl-hdi-1500/new/posts/ <![CDATA[Updated post - ATL HDI1000-keyboard stopped working]]> My original post: no keyboard buttons function. Does anyone have any thoughts as to the cause? When we freeze the screen, the roller ball works.

May 23rd update: last week we had the US serviced which fixed it for 2 days. He isn't really sure what he did to fix it. Took the cover off of the top (keyboard), unplugged everything (probes, etc) then plugged all back in. And it worked. two days later, a staf person set up the machine for the clinican. The clinician was changing the probe to Vaginal and the machine froze again. Same problem.

So, we think the problem is possibly:
intermittent?
a connection?
possdible related to the probes? The problem recurred when the probe was being changed and the only area of the machine that didn't freeze was the rollerball and the probes worked. no keys.

Any help is appreciated. Thanks! Kate

]]> http://www.u-d-s.com/forums/user/425/ 2011-05-10T14:49:48Z http://www.u-d-s.com/forums/topic/164/updated-post-atl-hdi1000keyboard-stopped-working/new/posts/ <![CDATA[toshiba ssa-340a]]> we encounter this toshiba ssa-340a ultrasound machine with "ERROR 102" . anybody know what that is?

]]> http://www.u-d-s.com/forums/user/257/ 2011-05-03T01:44:52Z http://www.u-d-s.com/forums/topic/115/toshiba-ssa340a/new/posts/ <![CDATA[ATL UM4 Access A probe leaking]]> I have an ancient ATL UM4 with a leaky ATL Access A, 3.0Mhz mechanical scanhead. p/n 101-24900-66. The scanhead is leaking from the black O-Ring 3/4 of the way down the probe head near the cable where it enters the scanhead. I have the proper ATL acoustic fluid to refill the scanhead (ATL p/n 130-27009-07) . What I don't have is a good sealing O-Ring. I would like to disassemble the scanhead, replace the O-Ring and refill the scanhead. It used to work before the fluid leaked out of it. I am hoping it will still work if I can refill the probe.
Any ideas how to get it apart? It almost looks like the base twists off, but I am not sure.
This scanhead is for an US system (ATL UM4) at a clinic that has no money to purchase a new US system. The image quality of the UM4 was adequate when the Access A probe worked.
Any ideas?
Steve

]]> http://www.u-d-s.com/forums/user/420/ 2011-05-02T19:39:53Z http://www.u-d-s.com/forums/topic/152/atl-um4-access-a-probe-leaking/new/posts/ <![CDATA[External hard drive for Philips EnVisor]]> Hi,

I'm facing the problem connecting external USB hard drive (or USB stick) to Philips EnVisor C.
Is it possible (there are free USB ports) ?
What do I have to have to make machine see external hard drive?

Regards,

Andrzej Weydmann

]]> http://www.u-d-s.com/forums/user/404/ 2011-04-05T21:06:45Z http://www.u-d-s.com/forums/topic/146/external-hard-drive-for-philips-envisor/new/posts/ <![CDATA[Atl HDI 1500 BIOS Password]]> Hello Guys, anyone know the bios password of an  HDI 1500?
Please is very urgent;

Thanks, Antonio

]]> http://www.u-d-s.com/forums/user/374/ 2011-04-05T10:40:26Z http://www.u-d-s.com/forums/topic/145/atl-hdi-1500-bios-password/new/posts/ <![CDATA[SONOLINE ADARA SOFTWARE PROBLEM]]> Is there any posibility that anyone has the Software of the SIEMENS SONOLINE ADARA?

Thanks in advance!!

Henry MOlina

]]> http://www.u-d-s.com/forums/user/348/ 2011-01-25T18:05:26Z http://www.u-d-s.com/forums/topic/134/sonoline-adara-software-problem/new/posts/ <![CDATA[ATL UM9 HDI Illegal scanhead]]> Hi, I have an ATL Ultramark 9 HDI and recently purchased two probes a phase and annular array's, but when I plugged on it, the monitor displays "Illegal scanhead, please reselect" so, I want to know, if could do anything to fix it, because I need the probes

Please help me, any info will be very important.

Greetings from Argentina

]]> http://www.u-d-s.com/forums/user/250/ 2010-12-28T04:09:17Z http://www.u-d-s.com/forums/topic/113/atl-um9-hdi-illegal-scanhead/new/posts/ <![CDATA[SonoSite 180 plus Doppler key]]> Hello,
can you please assist me?

I have a SonoSite 180Plus System.

According to the manual pressing the "7" Key which is the Doppler key" should enable the 'Doppler sample line" to show up on the screen.

but at this time the Doppler sample line is greyed out. and the option is not available. at this time when the key is pressed nothing happens.

does anyone know if this is an optional feature that need to be purchased seperately or I'm i just doing something wrong?

Thank you

]]> http://www.u-d-s.com/forums/user/245/ 2010-10-18T20:18:18Z http://www.u-d-s.com/forums/topic/111/sonosite-180-plus-doppler-key/new/posts/