CSR Menu - How to access your Version, Configuration Reports

When the system has powered on fully there are a series of buttons you need to press in order to access the CSR menu.

The first three buttons are located on the QWERTY keyboard: Code, Shift, and V.

The fourth button is located just under the monitor, there is a door that swings up and has several buttons behind it as well as adjustments for lighting and brightness/contrast. The button that you will need to press is labeled "Test".

Press and hold the Code, Shift, and V keys. Then press the "Test" button until a new menu appears on the screen with a listing that looks something like:

Version Report
Configuration Report

Use the trackball to highlight either Version Report or Configuration Report and press the soft key on the monitor that is directly below "Select".

The Version Report lists the system revision level as well as the probes that are currently found in the microcode. The Configuration Report lists the internal system serial number (found at top of screen when you enter the Report), as well as licensed options and transducers (which can be found on the 2nd page, as well as the 3rd if you have that many transducers licensed).

To exit the menu you can press the Shift/Code/V/Test again to take you out, or follow the menu items back to where it says "Exit".