how to install sony up.890MD printer

Dr. Serdar,

You won't need much to install the printer, just a few cables:

Power cable
BNC Video cable
BNC to 3.5mm stereo plug (for Remote print using the ultrasound keyboard)

In the bay below the back handlebar you will see a cluster of BNC connections, bottom left side. The BNC video cable will connect to "B/W Img Out", while the BNC portion of the BNC-to-3.5mm stereo plug connects to the "Rmt Exp" (Remote Expose) -- the 3.5mm end will plug into the "Remote" input on the UP-890 printer.

If you can't find a cable or cannot make one for the remote expose, you can use the Sony RM-91 'Remote Commander' as seen below:

After you've connected the video cable to the Sequoia, run the cable up through the system (there will be a hole in the back that you can pull the cable through) to where the printer will be sitting, then plug the cable to "Video In" on the printer. The power cable can be routed to the accessory power strip that's also in the back bay of the Sequoia.

That should be all you need. If you want help setting up the remote print function just let me know if you have a BNC-to-3.5mm stereo plug connector.