Sequoia Networking tips/tricks

Sort of a basic networking setup that I wrote down. If it works for you, great, if you have questions about the process.. post them in this topic.

Sequoia Networking

To change networking information:
- Boot system on
- At Imaging Screen – Press Setup
- Trackball down to Service UI – Press Trackball key (left/right side of trackball)
      o Trackball over Network Setup – Press Trackball key
      o Trackball over Change Network, press a trackball key
      o In the text box, type your location (ie, Office), select “Add”, press “Ok”, press
         “Ok” again after the message prompt says “Adding network complete”
      o Trackball over the new network you created, press a trackball key, then press “Prior”
      o Trackball over “Add”, press a Trackball key, Select “Hostname” and press OK.
      o Change name to SEQUOIA, Default Port is set to 2100, change IP Address to whatever
         address you want to assign the machine. Needs to be on the same subnet as the PACS;
         for example: 192.168.1.125 for PACS, ultrasound needs to be 192.168.1.***
      o Change the AE Title to SEQUOIA (or whatever you want to name the Sequoia on the network),
         and press “Ok”
      o Return to the previous screen.
      o Select “Add” again, select “Router”, Press “Ok”
      o Name – Your Routers name, Address – Your Routers IP Address; Press “Ok”
      o Return to the previous screen.
      o Select “Add”, select “DICOM Server”, Press “Ok”
      o Name – displays the name for the Server (can be whatever you want), IP Address – Needs to be
         the Address for the PACS server, Port – Default is set for 104, AE Title – ID for the PACS server,
         press “Ok”, press “Ok” again after the system tells you the DICOM server is updated, press “Prior”.
- Press “Prior”
- Press “Quit”
- Press “Ok” to Reboot system
     o    Once rebooted, go back into the Service UI – Networking Setup
     o    Select “Change Network”, select the network you created and press “Enable”,
        press “Activate Network”, then press “Ok”, press “Ok” again after the system prompts
        you to restart the machine.
     o    Press “Prior” to return to networking page, press “Prior” again to return to Service UI
- Press “Prior”
- Press “Quit”
- Press “Ok” to Reboot system